Resource Hub

Used Kroil @ my job as a power plant operator for the past 34 years…..awesome stuff…..If it’s seized up  get the Kroil!!!!

I was given an old can of Silikroil years ago from a tech who was liquidating an electronics fabrication company. I never heard of the stuff before. I noticed it had a faint sweet odor- unlike another penetrant that I loath using because it stinks so bad. I first tried it on some frozen lug nuts on my van that I suspected had galled because I couldn’t budge them even with a breaking bar. Silikroil did the trick! I was amazed! I have been hooked ever since and always have some with me at every job. I think of it as 10-50ftlbs of torque in a bottle and has enabled me to work on repairs that normally would have required air tools. Now I use it to restore old Hammond organs with frozen or jammed parts as it is safe for delicate mechanisms and has saved me from having to do involved and time consuming teardowns to unfreeze hard to get at gears.

“Prior to using Kroil, we had to do a lot more manual labor to free frozen parts. The breakage rate was 85%, which then required drilling out the broken studs. Kroil has reduce stud breakage by 80%.”

”Became a true believer of the Kroil products today. We were trying to pull a fan drive off the front of an engine and it was just not working. Had a cross bar puller on it and had it tensioned up pretty tight. I walked by the service truck and saw that Kroil can, so I sprayed a little bit on the back of the shaft and it popped about 3 seconds later! Started back with the puller and it fell off in my hands!”

I first used Kroil to get dowel pins out at my job as a machinist. I tried all kinds of things, and the only thing that worked was Kroil.